An elastomer bellows mechanical seal replaces both the spring and the sliding secondary seal with one moulded rubber bellows, usually conical. The bellows seals against the shaft and carries the rotating face, so the seal is a non-pusher: it does not slide along the shaft, and there is no O-ring to fret on a worn surface or hang up on a step.

The range includes the WMG1, the W2100, the W60 rubber bellows seal, the W2 multi-purpose non-pusher seal and the Type 1 and 1A patterns, along with W560 and AES P02 references. These are the seals found on water, wastewater and sanitary pumps where the product carries solids or the pump runs intermittently.

What elastomer bellows mechanical seals cover

A conical bellows is anchored on the shaft and pushes the rotating face onto the seat. Spring rate comes from the rubber section, so face load is light and rises as the bellows compresses. The light load suits soft faces and low-viscosity products, and it lets the seal run cooler than a coil design of the same size. It also means life depends on the bellows staying flexible, which is why elastomer choice decides more than any other single factor.

EPDM covers hot water, many acids and bases; FKM covers oils, fuels and solvents; FFKM is used when neither survives. Temperature runs from roughly -40 °C up to +220 °C depending on the elastomer and model. Past the pressure ceiling of a given design the bellows distorts and the face lifts, so the answer is a balanced cartridge rather than a harder rubber compound.

How to specify

  • Shaft size and the state of that surface. The bellows seals directly on the shaft, so a groove, a step or pitting will leak regardless of elastomer.
  • Chamber bore and depth, plus the face to seat gap. The same dimensional set used for any component seal.
  • Chemical list and elastomer. Check EPDM, FKM or FFKM against the actual product, including cleaning agents.
  • Temperature range, including CIP and washdown cycles that can be hotter than the process itself.
  • Pressure and dead-head behaviour. A pump that runs against a closed valve loads the faces harder than its rating suggests.
  • Solids and fibre content. This family handles them better than a pusher seal, so say what is in the fluid.

Typical applications

  • Municipal and industrial wastewater pumps
  • Food and beverage product transfer
  • Pool, spa and water feature circulation
  • Industrial laundry and washing plant
  • Chemical transfer carrying mild solids

What we supply in this range

Ordering and cross-reference

Name the product first, then the shaft diameter, chamber dimensions and the old seal number. For this family the elastomer is the decision, so a chemical name is more useful than a pH value. Victor's checks the bellows material against the temperature and the cleaning regime, then confirms the seat and gland fit. Cross-references to Burgmann MG1, John Crane 2100 and Vulcan Type 60 patterns are common, and the old seal number is usually enough to start. It belongs with the other non-pusher and spring-loaded types in the component mechanical seal range.

FAQ

Is a rubber bellows seal better than an O-ring pusher seal?

For dirty water, slurries and intermittent duty, yes. There is no sliding secondary seal to wear the shaft or seize on solids, and the seal is shorter and lighter.

What kills an elastomer bellows seal?

Heat and chemical attack on the rubber, usually together. The bellows hardens, face load drops and the seal starts to weep before it fails outright. Our note on why elastomer bellows seals perform in demanding systems covers the material side.

Elastomer Bellow Mechanical Seal

Elastomer bellow mechanical seals are molded, flexible sealing units made from rubber-based materials. The bellows provides both sealing and self-alignment, allowing the seal faces to maintain stable contact without additional springs. This simple, compact design makes elastomer bellow seals a cost-effective choice for general-purpose pumps operating in low-pressure, non-corrosive, and moderate-temperature conditions.

precision engineering & reliable seal materials

Our mechanical seals are manufactured using advanced CNC machining to achieve strict tolerances and stable performance. Each metal and elastomer component is made from high-quality materials, ensuring durability and long service life in demanding pump applications.

customized mechanical seal solutions for pumps

We develop tailor-made seal designs to match specific pump conditions and operating environments. Victor supplies OEM-equivalent mechanical seals for well-known pump brands, including IMO, Grundfos, Alfa Laval, Flygt, ABS, Lowara, Allweiler, KRAL, Emu, APV, Fristam and more.

fast technical support & after-sales service

Our engineering team provides quick assistance for installation, troubleshooting, and seal selection. This rapid response helps reduce equipment downtime and keeps your pumping systems running smoothly.

how does rubber bellow mechanical seal work

An elastomer bellow mechanical seal operates by relying on the flexibility of the bellows to maintain continuous contact between the stationary and rotating sealing faces. The bellows itself functions like a built-in spring, applying a consistent closing force that keeps the sealing faces pressed together, ensuring a leak-free interface. As the shaft rotates, a thin layer of fluid from the system forms between the sealing faces, creating a lubricating film that reduces friction, dissipates heat, and prevents excessive wear. The elastic nature of the bellows allows the seal to automatically adjust for axial movement, minor shaft misalignment, and gradual wear of the sealing surfaces. This self-compensating behavior ensures stable performance over time, without the need for manual adjustment or external springs. By absorbing small vibrations and accommodating dynamic changes in shaft position, the bellows minimizes stress on the sealing faces, reducing the risk of leakage or premature failure.

Overall, the elastomer bellow design allows the seal to maintain continuous, reliable contact under varying operational conditions, providing smooth rotation and effective sealing performance throughout its service life.

Features of elastomer bellow mechanical seal

reliable torque management

Elastomer bellow seals are designed to absorb both breakout and running torque through features like drive bands and interlocking tangs. This ensures that the bellows are not overstressed, preventing slippage and protecting the shaft and sleeve from wear or scoring. The positive drive design allows the seal to maintain stable contact during upset conditions.

automatic compensation and flexibility

The bellows’ elastic construction allows for automatic adjustment to compensate for abnormal shaft-end play, run-out, and primary ring wear. Uniform spring pressure provided by the bellows accommodates axial and radial shaft movement, ensuring the sealing faces remain in proper alignment. This self-compensating capability reduces maintenance requirements.

compact and easy installation

Elastomer bellow mechanical seals feature a unitized, cartridge-style construction with a single, non-clogging coil spring. This design prevents folding or creasing under pressure and allows the seal to operate reliably even with fluids containing solids. The compact, short axial length makes installation and replacement fast and straightforward.

elastomer bellow mechanical seal applications

Victor’s elastomer bellow mechanical seals are engineered to perform reliably across a wide range of pump and general industrial applications. Every unit undergoes precise dimensional verification and leak-proof testing, supported by continuous sampling control throughout manufacturing.

centrifugal pump seal

Elastomer bellow mechanical seals are widely used in centrifugal pumps because the flexible bellows can absorb minor shaft misalignment and axial movement. Their simple, single-unit structure ensures reliable sealing for water, light chemicals, and general industrial fluids, making them ideal for HVAC systems, circulation pumps, and industrial water supply applications.

In slurry pumps that handle fluids containing sand, silt, or fine particles, elastomer bellows provide stable sealing performance thanks to their ability to tolerate vibration and shaft movement. Although typically used in low-to-medium concentration slurries, they offer good abrasion resistance and chemical compatibility, making them suitable for mining, construction, and wastewater pretreatment systems.

Submersible pumps require seals that operate reliably underwater and resist contamination. Elastomer bellow mechanical seals are commonly used due to their compact design and reduced clogging risk. The bellows compensate for shaft deflection while maintaining a consistent closing force, making them suitable for sewage transfer, drainage, dewatering, and groundwater pumping.

In household and garden pumps—such as garden irrigation systems, pool pumps, shallow-well pumps, and small booster pumps—elastomer bellow seals offer an economical and easy-to-install solution. Their flexible structure allows stable performance in low-pressure and clean-water environments, making them ideal for residential and light-duty applications.

elastomer bellow mechanical seal materials

Victor uses carefully engineered material combinations for its elastomer bellow mechanical seals. Each seal can be configured with different face materials, seat options, elastomers, and metal components to match the fluid characteristics, temperature limits, and operating conditions of various pumps.

seal rotary face materials

Carbon Graphite Resin Impregnated: Resin impregnation improves strength and reduces porosity, ensuring stable performance in clean or lightly contaminated media.
Antimony Impregnated Carbon: Provides higher hardness and improved thermal conductivity, suitable for applications with higher load or moderate abrasives.
Hot-Pressing Carbon / Full Carbon: Dense and wear-resistant, delivering long service life in high-temperature or chemically aggressive environments.
Silicon Carbide (SiC / RBSiC / SSIC): Extremely hard and corrosion-resistant, ideal for high-speed pumps and abrasive fluids.
Tungsten Carbide (TC): Very tough and impact-resistant, performing well in slurry or high-pressure applications.

secondary seat materials

Aluminium Oxide (Ceramic): Aluminium oxide provides good hardness and corrosion resistance, suitable for clean water and general-purpose sealing.
Silicon Carbide (SiC / RBSiC / SSIC): Silicon carbide offers exceptional wear resistance and thermal shock stability for demanding industrial applications.
Tungsten Carbide (TC): Durable and abrasion-resistant, TC is ideal for slurry and high-pressure pumping conditions.
Carbon: Low friction and good emergency running capability, carbon suits for non-abrasive and moderate-temperature environments.

elastomers / auxiliary seal materials

NBR (Nitrile-Butadiene Rubber): Resistant to oils, fuels, and many hydrocarbons, NBR offers reliable sealing performance in general industrial pumps. It provides good compression set resistance and maintains elasticity under moderate temperatures, making it suitable for oil-based fluids, lubricating systems, and standard water applications.
EPDM (Ethylene-Propylene-Diene Rubber): Highly resistant to hot water, steam, mild chemicals, and weathering, EPDM performs well in systems where water-based media or alkaline solutions are present. Its excellent flexibility and temperature stability make it ideal for HVAC pumps, circulation pumps, and applications requiring long-term sealing reliability without oil exposure.
FKM / Viton (Fluorocarbon Rubber): Designed for high temperature and chemically aggressive environments, FKM provides outstanding resistance to acids, solvents, fuels, and corrosive fluids. It maintains superior sealing integrity under thermal cycling and vacuum conditions, making it suitable for chemical processing pumps and harsh industrial applications where durability is critical.
HNBR: With improved mechanical strength and enhanced heat and ozone resistance compared to standard NBR, HNBR performs reliably in dynamic applications subject to fluctuating pressures or higher load. It is commonly used in pumps handling refrigerants, oils with additives, or process fluids where both flexibility and toughness are required.

Spring and Metal Components materials

304 Stainless Steel: Provides reliable corrosion resistance for standard water and light-chemical applications.
316 Stainless Steel: Improved chloride corrosion resistance, ideal for seawater, chemical processing, and harsh industrial conditions.

elastomer bellow mechanical seal faq

Related topics

Acquire all kinds of knowledge from professional China pump mechanical seal manufacturer

Why choose a wave spring over multiple springs in mechanical seals?

For most modern mechanical seal designs, wave springs are the preferred axial loading solution over multiple coil springs, as they deliver a more compact profile, more uniform face loading, higher reliability, and lower total installed cost. Spring selection is a critical performance decision — seal face loading directly impacts leakage

Read More »

When should you use a cartridge mechanical seal?

Cartridge mechanical seals are the preferred choice when installation reliability, minimal downtime, and consistent performance in critical applications are top priorities. A cartridge seal is a factory-preassembled, self-contained module: all components — seal faces, springs, sleeve, and gland — are aligned and set at the factory, so the unit arrives

Read More »

Metal Bellow Seals vs Standard Seals: What’s Better?

Metal bellow seals are the clear choice for high-performance, extreme-condition service, while standard pusher seals deliver reliable performance at lower cost for moderate, general-purpose applications. This core tradeoff defines nearly every mechanical seal selection decision. Neither design is universally superior. Each serves a distinct duty range, and matching the seal

Read More »

When does a component seal still make sense?

Component mechanical seals remain the optimal choice in three common scenarios: when equipment was originally engineered for component-style seals and a like-for-like replacement is required; when a compact, integrated design with high reliability and simplified assembly is a priority; and when upgrading to a cartridge seal would add unnecessary complexity

Read More »

How to Install elastomer bellow mechanical seal

  1. Protect the precision lapped seal faces from dirt, oil, and scratches.
  2. Lightly lubricate the shaft, inner diameter of the rotary seal, counterbore, and outer diameter of the stationary seat. For Ethylene Propylene rubber, use only silicone lubricant.

  3. Press the stationary seat firmly into the counterbore, ensuring it sits squarely with the polished side facing the rotary seal.

  4. Slide the rotary seal along the shaft to contact the stationary seat fully and parallel; ensure the spring is correctly engaged.

  5. If included, install the gland plate gasket to seal the gland plate to the seal chamber.

  6. Check the sliding fit: release pressure on the gland plate and confirm the spring moves the seal forward. If not, relubricate and reinstall quickly to prevent the rubber from bonding to the shaft.

  7. Reassemble the pump and tighten all screws and nuts evenly.

  8. Flood the pump to check for leaks, then start the pump. Never operate the pump dry.

The lifespan of an elastomer bellow mechanical seal depends largely on how it’s used and maintained. Under normal operating conditions, most seals last about 1 to 3 years, but with proper care, they can often run 3 to 5 years or longer. Factors that affect longevity include the amount of vibration or shaft misalignment, the type of fluid being sealed, and the operating temperature. Regular inspection, cleaning, and lubrication can help prevent premature wear and keep the seal performing reliably throughout its service life.

To ensure long-lasting performance, regular maintenance of an elastomer bellow mechanical seal is essential. Periodically inspect the bellows, sealing faces, and O-rings for wear, cracks, or deformation, and replace any damaged components. Keep the sealing faces clean and free of debris to maintain the thin fluid film that provides lubrication. Avoid dry running, as this can quickly damage the seal surfaces, and always operate within the seal’s recommended temperature and pressure limits. Minimizing shaft vibration and ensuring proper alignment will reduce stress on the bellows and prevent premature failure. Regular checks and timely maintenance help extend service life and ensure reliable operation.