W301 Single spring mechanical shaft size eagle Burgmann BT-AR replacement

Features

• Rubber bellows mechanical seal
• Unbalanced
• Single spring
• Independent of direction of rotation
• Short axial installation length

Advantages

Mechanical seal for large-series cold water pumps, produced in millions of units per year. W301 owes its success to the wide range of application, the short axial length (this allows for more economic pump construction and saves material), and the best quality/price ratio. The elasticity of the bellows design enables a more robust operation.

The W301 can also be used as a multiple seal in tandem or back-to-back arrangement when the product media cannot ensure lubrication, or when sealing media with a higher solids content. Installation proposals can be provided upon request.

Operating range

Shaft diameter: d1 = 6 … 70 mm (0.24″ … 2.76″)
Pressure: p1* = 6 bar (87 PSI),
vacuum … 0.5 bar (7.45 PSI) up to 1 bar (14.5 PSI) with seat locking
Temperature:
t* = -20 °C … +120 °C (-4 °F … +248 °F)
Sliding velocity: vg = 10 m/s (33 ft/s)

* Dependent on medium, size and material

Combination material

Seal face:
Carbon graphite antimony impregnated Carbon graphite resin impregnated, Carbon graphite, full carbon , Silicon carbide, Tungsten carbide
Seat:
Aluminium oxide, Silicon carbide, Tungsten carbide,
Elastomers:
NBR (P), EPDM (E), FKM (V), HNBR (X4)
Metal parts: stainless steel

w301

W301 Data Sheet of Dimension (mm)

W301 data sheet of dimension

Our Services & Strength

PROFESSIONAL
Is a manufacturer of mechanical seal with equipped testing facility and strong technical force.

TEAM & SERVICE
We are a young, active and passionate sales team We can offer our customers first- class quality and innovative products at available prices.

ODM & OEM
We can offer customized LOGO, packing, color, etc. Sample order or small order is completely welcomed.

How to order

In ordering mechanical seal, you are requested to give us complete information as specified below:

1. Purpose: For which equipment or what factory use.
2. Size: Diameter of the seal in millimeter or inches
3. Material: what kind of material, strength requirement.
4. Coating: stainless steel, ceramic, hard alloy or silicon carbide
5. Remarks: Shipping marks and any other special requirement.

Description

W301 Single spring mechanical shaft size eagle Burgmann BT-AR replacement is a replacement mechanical seal built to a standard mounting envelope. It is normally specified for marine and offshore auxiliary pumps. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The unit is assembled around a single coil spring driving the seal through one central load path. The face pair is carbon graphite running on silicon carbide; secondary seals are NBR.

Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. Keep the faces clean during fitting; a single grit particle will open a leak path.

Clean the chamber and the shaft before fitting; grit left in the bore will tilt the gland. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.

As a rule, EPDM suits water-based duty, FKM suits oils and fuels, and FFKM is used where solvents would swell the other two. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.

Pricing and availability follow the pump model and shaft size given on the enquiry. The unit belongs to the mechanical seals line. For a different shaft size, see WMG912 replacement of Burgmann MG912, Single Seal unbalanced mechanical shaft sea or W560 Elastomer bellow mechanical seals replacement of Burgmann EA560. Include the quantity and the required elastomer option with the enquiry.

The reference carried by this unit is W301. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.