W560 Elastomer bellow mechanical seals replacement of Burgmann EA560

Features

• Single seal
• Loosely inserted seal face provides self-adjusting capability
• In-house manufactured sliding parts

Advantages

The W560 is self-adjusting to shaft misalignments and deflections because of the loosely inserted seal face as well as the ability of the bellows to stretch and tighten. The length of the contact area of the bellows with the shaft is an optimum compromise between ease of assembly (less friction) and sufficient adhesive force for torque transmission. Additionally, the seal fulfills very specific leakage requirements. Because the sliding parts are made in-house, a wide variety of special needs can be accommodated.

Recommended applications

• Water and waste water technology
• Chemical industry
• Process industry
• Water and waste water
• Glycols
• Oils
• Industrial pumps/equipment
• Submersible pumps
• Engine pumps
• Circulating pumps

Operating range

Shaft diameter:
d1 = 8 … 50 mm (0.375″ … 2″)
Pressure:
p1 = 7 bar (102 PSI),
vacuum … 0.1 bar (1.45 PSI)
Temperature:
t = -20 °C … +100 °C (-4 °F … +212 °F)
Sliding velocity: vg = 5 m/s (16 ft/s)
Axial movement: ±1.0 mm

Combination material

Stationary Ring: Ceramic, Carbon, SIC, SSIC, TC
Rotary Ring: Ceramic, Carbon, SIC, SSIC, TC
Secondary Seal: NBR/EPDM/Viton
Spring and Metal Parts: SS304/SS316

w560

W560 Data Sheet of Dimension (inches)

W560 data sheet of dimension

W560 Data Sheet of Dimension (mm)

W560 data sheet of dimension2

Company Advantages

Customization
We have a strong R&D team, and we can develop and produce products according to the drawings or samples the customers offered,

Low Cost
We are production factory, compared with the trading company, we has great advantages

High Quality
Strict material control and perfect testing equipment to ensure product quality

Multiformity
Products include slurry pump mechanical seal, agitator mechanical seal, paper industry mechanical seal, dyeing machine mechanical seal etc.

Good Service
We focus on developing high-quality products for top-end markets. Our products are in line with international standards

Description

W560 Elastomer bellow mechanical seals replacement of Burgmann EA560 is a replacement seal supplied for general pump duty. Typical duty is clean water and light chemical service. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The design is built around an elastomer bellows that seals on the shaft without a separate gasket. Faces are carbon graphite against silicon carbide, with NBR secondary sealing as standard.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Running the pump dry, even briefly, will damage the faces.

Check the shaft for wear at the secondary seal track and the chamber for scoring before the new unit goes on. A seal that has run dry shows heat colouring on the faces before it shows a leak.

As a rule, EPDM suits water-based duty, FKM suits oils and fuels, and FFKM is used where solvents would swell the other two. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.

Orders are matched on pump model, shaft size and medium. The unit belongs to the mechanical seal line. Related units in the same family include W2100 Elastomer Bellow Mechanical Seal Replacement of John Crane 2100 and WMG1 Elastomer Bellow Mechanical Seal Replaced Burgmann MG1. Include the quantity and the required elastomer option with the enquiry.

The reference carried by this unit is W560. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.