WSPF pump seal For Allweiler Pump SPF10, SPF20 replace Vulcan Type 8W

Features

O’-Ring mounted
Robust and non-clogging
Self-aligning
Suitable for general and heavy-duty applications
Designed to suit European non-din dimensions

Operating Limits

Temperature: -30°C to +150°C
Pressure: Up to 12.6 bar (180 psi)
For full Performance Capabilities please download data sheet
Limits are for guidance only. Product performance is dependent on materials and other operating conditions.

Allweiler SPF data sheet of dimension(mm)

Allweiler SPF data sheet of dimensionmm 1
Allweiler SPF data sheet of dimensionmm 2

Description

WSPF pump seal For Allweiler Pump SPF10, SPF20 replace Vulcan Type 8W is supplied as a like-for-like replacement for Allweiler pump applications. Typical duty is pulp and paper process water. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. The face pair is carbon graphite running on silicon carbide; secondary seals are NBR.

Rated duty is -30 °C to 150 °C, 12.6 bar maximum, with face speeds limited to 25 m/s. Running the pump dry, even briefly, will damage the faces.

Set the working height from the measured chamber depth rather than from the worn seal, then check face squareness before the pump goes back together. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Send the nameplate data with the model and shaft size, and the unit is checked against the original drawing. The unit belongs to the OEM mechanical seals selection line. For a different shaft size, see W8X OEM water pump shaft seal for Allweiler pump replce Vulcan type 8X or OEM pump shaft seal for Allweiler pump art no.38543. Include the quantity and the required elastomer option with the enquiry.

The reference carried by this unit is SPF10. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.