
WRO multiple spring and O-ring pusher mechanical seals Flowserve RO replacement
Features
• Single Seal
• Dual Seal available upon request
• Unbalanced
• Multi-spring
• Bi-directional
• Dynamic O-ring
Recommended applications
General Industries:
Pulp & Paper
Mining
Steel & Primary Metals
Food & Beverage
Corn Wet Milling & Ethanol
Other Industries
Chemicals:
Basic (Organic & Inorganic)
Specialty (Fine & Consumer)
Biofuels
Pharmaceutical
Water:
Water Management
Waste Water
Agriculture & Irrigation
Flood Control System
Power:
Nuclear
Conventional Steam
Geothermal
Combined Cycle
Concentrated Solar Power (CSP)
Biomass & MSW
Operating range
Shaft diameter: d1=20…100mm
Pressure: p=0…1.2Mpa(174psi)
Temperature: t = -20 °C …200 °C(-4°F to 392°F)
Sliding velocity: Vg≤25m/s(82ft/m)
Notes: The range of pressure, temperature and sliding velocity is depend on seals combination materials
Combination material
Rotary Face
Silicon carbide (RBSIC)
Tungsten carbide
Cr-Ni-Mo Sreel (SUS316)
Stationary Seat
Silicon carbide (RBSIC)
Carbon graphite resin impregnated
Auxiliary Seal
Fluorocarbon-Rubber (Viton)
Ethylene-Propylene-Diene (EPDM)
PTFE Coated VITON
PTFE T
Spring
Stainless Steel (SUS304)
Stainless Steel (SUS316)
Metal Parts
Stainless Steel (SUS304)
Stainless Steel (SUS316)
WRO Data Sheet of Dimension (inches)
Why choose us
Customization
We have a strong R&D team, and we can develop and produce products according to the drawings or samples the customers offered
Low Cost
We are production factory, compared with the trading company, we has great advantages
High Quality
Strict material control and perfect testing equipment to ensure product quality
Multiformity
Products include slurry pump mechanical seal, agitator mechanical seal, paper industry mechanical seal, dyeing machine mechanical seal etc.
Good Service
We focus on developing high-quality products for top-end markets. Our products are in line with international standards
Description
WRO multiple spring and O-ring pusher mechanical seals Flowserve RO replacement is a like-for-like replacement unit for standard pump seal chambers. Typical duty is pulp and paper process water. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The unit is assembled around a multi-spring carrier that spreads the spring load evenly over the sealing face. Standard build pairs silicon carbide with carbon graphite faces and NBR O-rings.
Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Running the pump dry, even briefly, will damage the faces.
Clean the chamber and the shaft before fitting; grit left in the bore will tilt the gland. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.
EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.
Quote the pump model, shaft diameter and medium when enquiring, and the seal is matched to the original part number. The unit belongs to the Victor’s mechanical seals line. Related units in the same family include Eagle burgmann multi spring H75F mechanical seals for water pump and W8T Multi-spring Mechanical Seal Replacement of John Crane 8-1T. Include the quantity and the required elastomer option with the enquiry.