WMG912 replacement of Burgmann MG912, Single Seal unbalanced mechanical shaft sea

Features

• For plain shafts
• Single spring
• Elastomer bellows rotating
• Balanced
• Independent of direction of rotation
• No torsion on bellows and spring
• Conical or cylindrical spring
• Metric and inch sizes available
• Special seat dimensions available

Advantages

• Fits into any installation space due to smallest outer seal diameter
• Important material approvals available
• Individual installation length can be achieved
• High flexibility due to extended selection of materials

Recommended applications

• Water and waste water technology
• Pulp and paper industry
• Chemical industry
• Cooling fluids
• Media with low solids content
• Pressure oils for bio diesel fuels
• Circulating pumps
• Submersible pumps
• Multi-stage pumps (non-drive side)
• Water and waste water pumps
• Oil applications

Operating range

Shaft diameter:
d1 = 10 … 100 mm (0.375″ … 4″)
Pressure: p1 = 12 bar (174 PSI),
vacuum up to 0.5 bar (7.25 PSI),
up to 1 bar (14.5 PSI) with seat locking
Temperature:
t = -20 °C … +140 °C (-4 °F … +284 °F)
Sliding velocity: vg = 10 m/s (33 ft/s)
Axial movement: ±0.5 mm

Combination material

Stationary Ring: Ceramic, Carbon, SIC, SSIC, TC
Rotary Ring: Ceramic, Carbon, SIC, SSIC, TC
Secondary Seal: NBR/EPDM/Viton
Spring and Metal Parts: SS304/SS316

WMG912
WMG912 data sheet of dimension

Why choose us

1.  more than 20-year experience in mechanical seal and spare part area.

2. provide right seal solution according to the customer’s requirement.

3. top quality+ fast delivery time+very competitive price =Ningbo Victor seals

4. top after-sale service against quality problem.

If the seal is not the one you need, contact us and inform us your pump model or drawing, material, shaft size for quotation. We will advise you and offer you corresponding mechanical seals.

Customized products and OEM is welcomed.

Packing & Delivery

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.

Usually we pack each seal with plastic film in plain white box or brown box with customer model number.

Description

WMG912 replacement of Burgmann MG912, Single Seal unbalanced mechanical shaft sea is a like-for-like replacement unit for standard pump seal chambers. Typical duty is clean water and light chemical service. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The load path runs through an elastomer bellows that seals on the shaft without a separate gasket. Standard build pairs carbon graphite with silicon carbide faces and NBR O-rings. The unit is unbalanced, which suits the lower pressure range it is designed for.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Running the pump dry, even briefly, will damage the faces.

Clean the chamber and the shaft before fitting; grit left in the bore will tilt the gland. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.

Pricing and availability follow the pump model and shaft size given on the enquiry. The unit belongs to the Victor’s mechanical seal range line. For a different shaft size, see W250 single-spring pusher pump seal Burgmann HA211 replacement or W301 Single spring mechanical shaft size eagle Burgmann BT-AR replacement. Include the quantity and the required elastomer option with the enquiry.

The reference carried by this unit is WMG912. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.