welded type metal bellow mechanical seal John crane W680 for pump

Features

• Edge-welded metal bellows
• Static secondary seal
• Standard components
• Available in single or dual arrangements, shaft-mounted or in a cartridge
• The Type 670 meets API 682 requirements

Performance Capabilities

• Temperature: -75°C to +290°C/-100°F to +550°F (Depending on materials used)
• Pressure: Vacuum to 25 barg/360 psig (See basic pressure ratings curve)
• Speed: U-p to 25mps / 5,000 fpm

Typical Applications

• Acids
• Aqueous solutions
• Caustics
• Chemicals
• Food products
• Hydrocarbons
• Lubricating fluids
• Slurries
• Solvents
• Thermo-sensitive fluids
• Viscous fluids and polymers
• Water

w680
w680 diameter
w680 diameter2

Description

welded type metal bellow mechanical seal John crane W680 for pump is a replacement mechanical seal built to a standard mounting envelope. Typical duty is food and beverage process lines. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The design is built around a welded metal bellows that takes the elastomer out of the load path. Standard build pairs silicon carbide with carbon graphite faces and NBR O-rings.

Service limits are -75 °C to 290 °C, pressure to 25 bar and face speed to 25 m/s. Running the pump dry, even briefly, will damage the faces.

Check the shaft for wear at the secondary seal track and the chamber for scoring before the new unit goes on. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Pricing and availability follow the pump model and shaft size given on the enquiry. The unit belongs to the Victor’s mechanical seals line. Two close alternatives are AES P02 Elastomer Bellow Mechanical Seal John Crane Type 2 N SEAT and Metal bellow balanced pump mechanical seals WMF95N. Include the quantity and the required elastomer option with the enquiry.

The reference carried by this unit is W680. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.