
W8T Multi-spring Mechanical Seal Replacement of John Crane 8-1T
Features
• Unbalanced
• Multi-spring
• Bi-directional
• Dynamic O-ring
Recommended applications
• Chemicals
• Crystallizing fluids
• Caustics
• Lubricating liquid
• Acids
• Hydrocarbons
• Aqueous solutions
• Solvents
Operating range
•Temperature: -40°C to 260°C/-40°F to 500°F(depend on materials used)
•Pressure: Type 8-122.5 barg /325 psig Type 8-1T13.8 barg/200 psig
•Speed: Up to 25 m/s / 5000 fpm
•NOTE:For applications with speeds greater than25 m/s / 5000 fpm, a rotating seat (RS)arrangement is recommended
Combination material
Seal ring: Car, SIC,SSIC TC
Secondary seal: NBR, Viton, EPDM etc.
Spring and metal parts: SUS304, SUS316
W8T Data Sheet of Dimension (inches)
Our service
Quality: We have a strict quality control system. All products ordered from our factory are inspected by a professional quality control team.
After-sales service: We provide after-sales service team, all problems and questions will be resolved by our after-sales service team.
MOQ: We accept small orders and mixed orders. According to our customers’ requirements, as a dynamic team, we want to connect with all our customers.
Experience: As a dynamic team, through our more than 20 years of experience in this market, we are still continuing to research and learn more knowledge from customers, hoping that we can become the largest and professional supplier in China in this market business one.
Description
W8T Multi-spring Mechanical Seal Replacement of John Crane 8-1T is a replacement mechanical seal built to a standard mounting envelope. Typical duty is building services and HVAC plant. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The working element is a multi-spring carrier that spreads the spring load evenly over the sealing face. Faces are silicon carbide against carbon graphite, with FKM secondary sealing as standard. The unit is unbalanced, which suits the lower pressure range it is designed for.
It is approved for -40 °C to 260 °C, up to 122.5 bar and 25 m/s at the faces. Keep the faces clean during fitting; a single grit particle will open a leak path.
Check the shaft for wear at the secondary seal track and the chamber for scoring before the new unit goes on. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.
EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.
Send the nameplate data with the model and shaft size, and the unit is checked against the original drawing. The unit belongs to the mechanical seals line. Two close alternatives are W2100 Elastomer Bellow Mechanical Seal Replacement of John Crane 2100 and Eagle burgmann multi spring H75F mechanical seals for water pump. Include the quantity and the required elastomer option with the enquiry.