W59U General Purpose DIN Multi-spring PTFE Wedge Seal

Features

• A versatile design with multiple material options for the widest range of liquids and temperatures.
• An unbalanced seal with the advantage of being a very short unit fitted to a straight through shaft.
• Multiple S-rings ensure even face loading while compensating for acceptable shaft misalignment.

Recommended applications

• Chemical applications
• Oil refining,
• Petrochemical
• Pharmaceutical industries

Operating range

• Temperature: -100°C to 400°C/-150°F to 750°F (depending on materials used)
• Pressure: W59U up to 24 bar g/350 psig 59B up to 50 bar g/725 psig
• Speed: up to 25 m/s/5000 fpm
• End Play/Axial Float Allowance: ±0.13mm/0.005″

Combination material

Stationary Ring: Ceramic, Silicon Carbide, TC
Rotary Ring: Carbon, TC, Silicon Carbide
Secondary Seal: NBR, EPDM, Viton, PTFE
Spring and Metal Parts: SS304/SS316

w95u

W59U Data Sheet (mm)

W59U data sheet

Why choose us

We supply multiple Spring seals, Automotive Pump seals, Metal Bellows seals, Teflon Bellow seals, Replacement to major O.E.M seals like Flygt seals, Fristam pump seals, A.P.V. pump seals, Alfa Laval pump seals, Grundfos pumps seals, Inoxpa pump seals, Lowara pump seals, Hidrostal pump seals, E.M.U. pump seals, Allweiler pump seals, IMO pump seals, Pump seals

Shipping:
We will ship your order 15-20 days after the final PO. if you need it urgently, please kindly contact us to check the stock.

Feedback:
We cherish every feedback left by our customer; If there are any problems, please contact us firstly before leaving any negative or neutral feedback. We will deal with you to solve any problems ASAP. We hope you like our items and enjoying your shopping and we also hope you can give us a positive feedback. Thanks.

Service:
If you have any questions, please do not hesitate to contact us. We will do our best, it would be our great pleasure to do something for you. We support big quantity orders and OEM service, if you need, please contact us directly, we will offer you with best price and excellent service.

Description

W59U General Purpose DIN Multi-spring PTFE Wedge Seal is a replacement seal supplied for general pump duty. Most units go into clean water and light chemical service. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a multi-spring carrier that spreads the spring load evenly over the sealing face. The face pair is ceramic running on silicon carbide; secondary seals are NBR. The unit is unbalanced, which suits the lower pressure range it is designed for.

It is approved for -100 °C to 400 °C, up to 24 bar and 25 m/s at the faces. Keep the faces clean during fitting; a single grit particle will open a leak path.

Set the working height from the measured chamber depth rather than from the worn seal, then check face squareness before the pump goes back together. A seal that has run dry shows heat colouring on the faces before it shows a leak.

As a rule, EPDM suits water-based duty, FKM suits oils and fuels, and FFKM is used where solvents would swell the other two. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Replacement orders are confirmed against the original part number and the shaft size. The unit belongs to the mechanical seal manufacturer line. For a different shaft size, see W58U General Purpose DIN Multi-spring O-ring Pusher Seal or W8T Multi-spring Mechanical Seal Replacement of John Crane 8-1T. Include the quantity and the required elastomer option with the enquiry.

The reference carried by this unit is W59U. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.