W250 single-spring pusher pump seal Burgmann HA211 replacement

Features

• Single seal
• Unbalanced
• Independent of direction of rotation
• Positive torque transmission due to bayonet
• drive between seal head and drive collar
• O-Ring groove for ventilation prevents solids build-up and enhances flexibility

Recommended applications

Pulp and paper industry
Water and waste water technology
High-viscosity liquids
Pulp suspensions
Process pumps
Pulp pumps

Operating range

Pressure: p = 12 bar (174 PSI)
Temperature: t = -20 °C … 160 °C (-4 °F … +320 °F)
Sliding velocity: … 20 m/s (66 ft/s)
Viscosity: … 300 Pa·s
Solids content: … 7 %

Combination material

Seal face: Silicon carbide
Seat: Silicon carbide
Secondary seals: EPDM, FKM
Metal parts: CrNiMo steel

w250

W250 data sheet of dimension (mm)

W250 data sheet of dimension

FAQ

Q1Are you a factory or a trading company?
AWe are a professional factory with 20 years of experience in designing and manufacturing mechanical seals
Q2Can I get an sample to check the quality of products?
AYes. We can send you free samples to check the quality within 3-5days.
Q3Do you provide free samples?
AWe can provide free samples, but you need to pay for the freight to your destination.
Q4What payment terms do you accept?
AWe accept T/T, .
Q5I can not find our products in your catalog. Can you make customized products for us?
AYes. Customized products are available according to your drawings or working conditions.
Q6Could you design it if I don’t have drawings or pictures for custom products?
AYes, we can make the best suitable design in accordance with your application and working conditions.

Packing & Delivery

We usually deliver the goods by express like DHL, Fedex, TNT, UPS, but we can also ship the goods by air or by sea if the goods weight and volume is big.

For the packing, we pack each seals with plastic film and then in plain white box or brown box. And then in strong carton.

Description

W250 single-spring pusher pump seal Burgmann HA211 replacement is a replacement seal supplied for general pump duty. It is normally specified for building services and HVAC plant. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The load path runs through O-ring mounting that keeps the spring out of the pumped medium. The face pair is silicon carbide running on carbon graphite; secondary seals are FKM.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Keep the faces clean during fitting; a single grit particle will open a leak path.

Measure shaft diameter, chamber depth and working height before stripping the old unit; the new seal is set to those numbers, not to the dimensions of the worn part. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.

As a rule, EPDM suits water-based duty, FKM suits oils and fuels, and FFKM is used where solvents would swell the other two. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Send the nameplate data with the model and shaft size, and the unit is checked against the original drawing. The unit belongs to the Victor’s mechanical seals line. Related units in the same family include WMG912 replacement of Burgmann MG912, Single Seal unbalanced mechanical shaft sea and W155 O-ring single spring pump seals replace Burgmann BT-FN. Include the quantity and the required elastomer option with the enquiry.

The reference carried by this unit is W250. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.