
W1677 Sinusoidal wave spring Mechanical Seal replace Vulcan type 1677
Features
• Double wave spring for strength and reliability
• Compact design for confined spaces
• Minimal shaft wear
• Suitable to DIN24960 (EN12756) dimensions
Recommended applications
• Process industry
• Chemical industry
• Pulp and paper industry
• Water and waste water technology
• Shipbuilding
• Lube oils
• Low solids content media
• Water / sewage water pumps
• Chemical standard pumps
• Vertical screw pumps
• Gear wheel feed pumps
• Multistage pumps (drive side)
• Circulation of printing colors with viscosity 500 … 15,000 mm2/s.
Operating range
• Temperature: -30°C to +140°C
• Pressure: Up to 22 bar (320 psi)
• For full Performance Capabilities please download data sheet
• Limits are for guidance only. Product performance is dependent on materials and other operating conditions.
Combination material
Stationary Ring: Carbon/SIC/TC
Rotary face: Carbon/Sic/TC
Metal part: SS304, SS316
W1677 data sheet of dimension (mm)
Specifications of Wave Spring Mechanical Seals
Seal Characteristics: Single acting, Unbalanced, Inside mounted, Independent of direction of rotation
Application: Ligh abrasive slurry, Light sewage water, High viscosity fluid, General & light chemicals
Seal Face Materials: Carbon, Tungsten carbide, Ceramic
Metal Parts: SS316, SS304 Secondary Seal: Elastomers, PTFE
Application of wave spring mechanical seals
Wave Spring seals are internally mounted which are non-clogging.This type of mechanical seals are widely used in centrifugal pumps and high viscosity handling pumps in purification plants, pulp & paper, chemical, petrochemical and sugar industries, brewery and pharmaceutical applications. Single Wave spring seals are designed for bi-directional and work with high viscous, abrasive media ,water, oils, fuels, low aggressive chemical substances and liquids containing solid particles. The spare parts are interchangeable without modification. seal faces are easily inserted. Wave Springs Improve Mechanical Seal Design. Mechanical seals are used for the sealing of rotating shafts against a stationary housing, such as pumps.
How to order
In ordering mechanical seal, you are requested to give us complete information as specified below:
1. Purpose: For which equipments or what factory use
2. Size: Diameter of the seal in millimeter or inches
3. Material: what kind of material, strength requirement
4. Coating: stainless steel, ceramic, hard alloy or silicon carbide
5. Remarks: Shipping marks and any other special requirement
Description
W1677 Sinusoidal wave spring Mechanical Seal replace Vulcan type 1677 is a replacement mechanical seal built to a standard mounting envelope. Most units go into cooling water and service water circuits. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The load path runs through a wave spring that keeps the axial stack short while holding uniform face pressure. The face pair is carbon graphite running on silicon carbide; secondary seals are NBR.
It runs from -30 °C to 140 °C, up to 22 bar, at face speeds to 25 m/s. Running the pump dry, even briefly, will damage the faces.
Measure shaft diameter, chamber depth and working height before stripping the old unit; the new seal is set to those numbers, not to the dimensions of the worn part. A seal that has run dry shows heat colouring on the faces before it shows a leak.
As a rule, EPDM suits water-based duty, FKM suits oils and fuels, and FFKM is used where solvents would swell the other two. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.
Pricing and availability follow the pump model and shaft size given on the enquiry. The unit belongs to the mechanical seal line. Two close alternatives are W20 Single spring mechanical seals replace Vulcan Diaphragm Type 20 and W60 Rubber bellows Mechanical Seal replace Vulcan type 60. Include the quantity and the required elastomer option with the enquiry.
The reference carried by this unit is W1677. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.