
W155 O-ring single spring pump seals replace Burgmann BT-FN
Features
• Single pusher-type seal
• Unbalanced
• Conical spring
• Dependent on direction of rotation
Recommended applications
• Building services industry
• Household appliances
• Centrifugal pumps
• Clean water pumps
• Pumps for domestic applications and gardening
Operating range
Shaft diameter:
d1*= 10 … 40 mm (0.39″ … 1.57″)
Pressure: p1*= 12 (16) bar (174 (232) PSI)
Temperature:
t* = -35 °C… +180 °C (-31 °F … +356 °F)
Sliding velocity: vg = 15 m/s (49 ft/s)
* Dependent on medium, size and material
Combination material
Face: Ceramic, SiC, TC
Seat: Carbon, SiC, TC
O-rings: NBR, EPDM, VITON, Aflas, FEP, FFKM
Spring: SS304, SS316
Metal parts: SS304, SS316
W155 data sheet of dimension (mm)
Description
W155 O-ring single spring pump seals replace Burgmann BT-FN is a replacement seal supplied for general pump duty. It is normally specified for building services and HVAC plant. Bore and shaft tolerances follow the original part, so no adaptor is needed.
Internally the seal uses a conical spring that keeps the seal short in axial length. Faces are silicon carbide against carbon graphite, with FKM secondary sealing as standard.
Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. Running the pump dry, even briefly, will damage the faces.
Set the working height from the measured chamber depth rather than from the worn seal, then check face squareness before the pump goes back together. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.
As a rule, EPDM suits water-based duty, FKM suits oils and fuels, and FFKM is used where solvents would swell the other two. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.
Quote the pump model, shaft diameter and medium when enquiring, and the seal is matched to the original part number. The unit belongs to the Victor’s pump mechanical seal line. For a different shaft size, see WE41 O-ring mechanical seals replace Burgmann BT-RN or W20 Single spring mechanical seals replace Vulcan Diaphragm Type 20. Include the quantity and the required elastomer option with the enquiry.
The reference carried by this unit is W155. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.