
TC ring
Tungsten Carbide(TC) Performance Index
Description
TC ring is a like-for-like replacement unit for standard pump seal chambers. It is normally specified for building services and HVAC plant. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The working element is a spring-loaded pusher assembly. The face pair is tungsten carbide running on silicon carbide; secondary seals are NBR.
Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. Keep the faces clean during fitting; a single grit particle will open a leak path.
Set the working height from the measured chamber depth rather than from the worn seal, then check face squareness before the pump goes back together. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.
EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.
Orders are matched on pump model, shaft size and medium. The unit belongs to the mechanical seal spare parts line. Related units in the same family include Carbon Ring and Ceramic ring. Include the quantity and the required elastomer option with the enquiry. The part number and the pump model are the two things to match; the set is then checked against the original drawing before it ships. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site.