


replacement mechanical seals for Allweiler pump art no 35362
This seal is the replacement mechanical seals used in Allweiler pump, art number 35362.
Shaft size: 30mm
Material : ceramic, sic, carbon, nbr, viton
We can supply many replacement mechanical seals for Allweiler pump, IMO pump, Alfa Laval pump, Grundfos pump, Flygt pump with a high quality.
Description
replacement mechanical seals for Allweiler pump art no 35362 is supplied as a like-for-like replacement for Allweiler pump applications. Most units go into process water in general industry. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The working element is a spring-loaded pusher assembly. Faces are silicon carbide against carbon graphite, with FKM secondary sealing as standard. The unit is unbalanced, which suits the lower pressure range it is designed for.
Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Keep the faces clean during fitting; a single grit particle will open a leak path.
Set the working height from the measured chamber depth rather than from the worn seal, then check face squareness before the pump goes back together. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.
As a rule, EPDM suits water-based duty, FKM suits oils and fuels, and FFKM is used where solvents would swell the other two. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.
Orders are matched on pump model, shaft size and medium. The unit belongs to the Victor’s OEM pump seals line. Two close alternatives are OEM mechanical seals for Allweiler pump art no 33993 and Mechanical shaft seals for Allweiler pump art no. 49680. Include the quantity and the required elastomer option with the enquiry.
The reference carried by this unit is 35362. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.