


OEM replacement mechanical seals for Allweiler pump 33999
This mechanical seals are used in the Allweiler pump, model number 33999
Material: ceramic, carbon viton
We can produce replacement mechanical seals for Allweiler pump, IMO pump, Kral pump, Alfa laval pump, Grundfos pump, Flygt pump etc with a very competitive price and good quality
Description
OEM replacement mechanical seals for Allweiler pump 33999 is a replacement mechanical seal for Allweiler pumps, built to the original mounting envelope. Typical duty is food and beverage process lines. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The working element is a spring-loaded pusher assembly. The face pair is ceramic running on silicon carbide; secondary seals are FKM. It is a balanced design, so face loading stays controlled as pressure rises.
Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. A short dry run is enough to score the faces, so prime the chamber before start-up.
Check the shaft for wear at the secondary seal track and the chamber for scoring before the new unit goes on. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.
EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.
Send the nameplate data with the model and shaft size, and the unit is checked against the original drawing. The unit belongs to the OEM mechanical seals line. Two close alternatives are OEM mechanical seals for Allweiler pump art no 33993 and replacement mechanical seals for Allweiler pump art no 35362. Include the quantity and the required elastomer option with the enquiry.
The reference carried by this unit is 33999. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.