


OEM pump shaft seal for Allweiler pump art no.38543
Features
This seals is the replacement mechnical seals used in Allweiler pump, part number is 38543
Material: SIC, ceramic, Carbon, NBR, VITON,
Ningbo Victor can produce various kinds of replacement mechanical seals for IMO pump, Grundfos pump, Allweiler pump, Flygt pump
Description
OEM pump shaft seal for Allweiler pump art no.38543 is used to replace the original seal on Allweiler pumps in service, on the same shaft and chamber dimensions. It is normally specified for pulp and paper process water. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The working element is a spring-loaded pusher assembly. Faces are silicon carbide against carbon graphite, with FKM secondary sealing as standard.
Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Running the pump dry, even briefly, will damage the faces.
Set the working height from the measured chamber depth rather than from the worn seal, then check face squareness before the pump goes back together. A seal that has run dry shows heat colouring on the faces before it shows a leak.
EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.
Pricing and availability follow the pump model and shaft size given on the enquiry. The unit belongs to the OEM mechanical seals supplier line. Two close alternatives are W8X OEM water pump shaft seal for Allweiler pump replce Vulcan type 8X and OEM mechanical seals for Allweiler pump art no 33993. Include the quantity and the required elastomer option with the enquiry.
The reference carried by this unit is 38543. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.