OEM pump mechanical seals for IMO ACG/UCG series 174102

Product Parameters

OEM IMO 1
OEM IMO 2

Description

When the original IMO seal is discontinued or on long lead, OEM pump mechanical seals for IMO ACG/UCG series 174102 is the replacement that keeps the pump running. Typical duty is clean water and light chemical service. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. The face pair is carbon graphite running on silicon carbide; secondary seals are NBR. The unit is unbalanced, which suits the lower pressure range it is designed for.

Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. Running the pump dry, even briefly, will damage the faces.

Before fitting, record shaft diameter, seal chamber bore and depth; the axial working height is set from those three measurements, not from the old seal alone. A seal that has run dry shows heat colouring on the faces before it shows a leak.

As a rule, EPDM suits water-based duty, FKM suits oils and fuels, and FFKM is used where solvents would swell the other two. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Quote the pump model, shaft diameter and medium when enquiring, and the seal is matched to the original part number. The unit belongs to the OEM mechanical seals range line. For a different shaft size, see OEM mechanical seals for IMO pump series ACG/UCG XVXX 190335 or OEM shaft mechanical seals for IMO ACD series XVXX 192691. Include the quantity and the required elastomer option with the enquiry.

The reference carried by this unit is 174102. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.