OEM mechanical seals for Allweiler pump art no 33993

This mechanical seal is used in the Allweiler pump spare part number is 33993

Material: sic, carbon, ceramic, viton

Ningbo Victor seals can produce OEM replacement mechanical seals for Allweiler, KRAL, IMO, Grundfos, Flygt, Alfa Laval with high quality and competitive price

Description

OEM mechanical seals for Allweiler pump art no 33993 replaces the original seal on Allweiler pumps without changing the housing or the shaft. Most units go into cooling water and service water circuits. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. Faces are silicon carbide against carbon graphite, with FKM secondary sealing as standard. It is a balanced design, so face loading stays controlled as pressure rises.

Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. Running the pump dry, even briefly, will damage the faces.

Clean the chamber and the shaft before fitting; grit left in the bore will tilt the gland. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.

Replacement orders are confirmed against the original part number and the shaft size. The unit belongs to the OEM mechanical seals line. Related units in the same family include Mechanical shaft seals for Allweiler pump art no. 49680 and replacement mechanical seals for Allweiler pump art no 35362. Include the quantity and the required elastomer option with the enquiry.

The reference carried by this unit is 33993. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.