
OEM Grundfos-1 Type H pump mechanical seals
Application
GRUNDFOS® Pump Types
This seal can be used in GRUNDFOS® Pump CR1,CR3,CR5,CRN1,CRN3,CRN5,CRI1,CRI3,CRI5 Series.CR32, CR45, CR64, CR90 Series pump
CRN32, CRN45, CRN64, CRN90 Series pump
For more information, please do not hesitate to contact our Technology department
Combination Materials
Rotary Face
Silicon carbide (RBSIC)
Tungsten carbide
Stationary Seat
Silicon carbide (RBSIC)
Carbon graphite resin impregnated
Tungsten carbide
Auxiliary Seal
Ethylene-Propylene-Diene (EPDM)
Fluorocarbon-Rubber (Viton)
Spring
Stainless Steel (SUS304)
Stainless Steel (SUS316)
Metal Parts
Stainless Steel (SUS304)
Stainless Steel (SUS316)
Shaft Size
12mm, 16mm,22mm
Description
OEM Grundfos-1 Type H pump mechanical seals is supplied as a like-for-like replacement for Grundfos pump applications. Typical duty is clean water and light chemical service. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The working element is a spring-loaded pusher assembly. The face pair is tungsten carbide running on silicon carbide; secondary seals are FKM. The unit is unbalanced, which suits the lower pressure range it is designed for.
Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. A short dry run is enough to score the faces, so prime the chamber before start-up.
Set the working height from the measured chamber depth rather than from the worn seal, then check face squareness before the pump goes back together. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.
As a rule, EPDM suits water-based duty, FKM suits oils and fuels, and FFKM is used where solvents would swell the other two. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.
Pricing and availability follow the pump model and shaft size given on the enquiry. The unit belongs to the Victor’s OEM pump seals line. Related units in the same family include Grundfos-13 long type mechanical seals for Grundfos SA pump and Grundfos-12 60mm long type mechanical seals for Grundfos SA pump. Include the quantity and the required elastomer option with the enquiry.