OEM cartridge mechanical seal for taiko kikai marine pump shaft size 35mm HC-51MJ

OEM pump mechanical seals for TAIKO KIKAI pump

Shaft size: 35mm

Material: SIC, CARBON, TC, Stainless steel, VITON

Description

OEM cartridge mechanical seal for taiko kikai marine pump shaft size 35mm HC-51MJ is the replacement option for Taiko pumps where the factory part is no longer stocked. It is normally specified for light-duty chemical transfer. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The load path runs through a cartridge build that is set on the bench and fitted as one unit. Standard build pairs tungsten carbide with silicon carbide faces and FKM O-rings.

Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. A short dry run is enough to score the faces, so prime the chamber before start-up.

Measure shaft diameter, chamber depth and working height before stripping the old unit; the new seal is set to those numbers, not to the dimensions of the worn part. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Orders are matched on pump model, shaft size and medium. The unit belongs to the OEM mechanical seals line. For a different shaft size, see OEM cartridge mechanical shaft seal for Naniwa pump 34.4mm or OEM sic multi-spring Taiko pump mechanical seal marine industry. Include the quantity and the required elastomer option with the enquiry.