


Mechanical shaft seals for Allweiler pump art no. 49680
This Mechanical seal is used in the Allweiler pump spare part number is 49680.
Material: sic, carbon, viton,
We Ningbo Victor seals can produce mechanical seals for various pump such as IMO, Grundfos, Allweiler, Flygt, Alfa Laval, Kral etc, with very good price and quality.
Description
Mechanical shaft seals for Allweiler pump art no. 49680 is used to replace the original seal on Allweiler pumps in service, on the same shaft and chamber dimensions. Most units go into process water in general industry. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The working element is a spring-loaded pusher assembly. The face pair is silicon carbide running on carbon graphite; secondary seals are FKM. The unit is unbalanced, which suits the lower pressure range it is designed for.
Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Keep the faces clean during fitting; a single grit particle will open a leak path.
Fitting follows the standard procedure: measure shaft diameter, chamber depth and working height, then set the seal to the recorded dimension before the pump is reassembled. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.
EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.
Orders are matched on pump model, shaft size and medium. The unit belongs to the OEM mechanical seals line. Related units in the same family include OEM mechanical seals for Allweiler pump art no 33993 and replacement mechanical seals for Allweiler pump art no 35362. Include the quantity and the required elastomer option with the enquiry.
The reference carried by this unit is 49680. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.