


Marine pump mechanical seals for IMO 190340
The IMO 190340 is a seal, which can be categorized as a rubber bellow seal. It is an alternative to the Qseals QFRB24, AES B092SSU, Flowserve M410LA001 and 206 others. It is suited for the Allweiler SNS 1300, APV SRG103, Flowserve 50 WB 100 and 400 others.
We Ningbo Victor seals can produce replacement mechanical seals for IMO, Allweiler, Kral, Grundfos, Alfa Laval, Flygt with a very good price and high quality.
Description
Marine pump mechanical seals for IMO 190340 is the replacement option for IMO pumps where the factory part is no longer stocked. It is normally specified for food and beverage process lines. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The working element is a spring-loaded pusher assembly. Faces are carbon graphite against silicon carbide, with NBR secondary sealing as standard. The unit is unbalanced, which suits the lower pressure range it is designed for.
Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. A short dry run is enough to score the faces, so prime the chamber before start-up.
Measure shaft diameter, chamber depth and working height before stripping the old unit; the new seal is set to those numbers, not to the dimensions of the worn part. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.
EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.
Replacement orders are confirmed against the original part number and the shaft size. The unit belongs to the OEM mechanical seals line. Related units in the same family include OEM mechanical seals for IMO pump series ACG/UCG XVXX 190335 and OEM pump mechanical seals for IMO ACG/UCG series 174102. Include the quantity and the required elastomer option with the enquiry.
The reference carried by this unit is 190340. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.