LWR-3 mechanical seals 16mm for LOWARA pump replace Roten UNE5-16MM

Operation Conditions

Temperature: -20℃ to 200℃ dependent on the elastomer
Pressure: Up to 8 bar
Speed: Up to 10m/s
End Play /axial float Allowance:±1.0mm
Size: 16mm

Material

Face: Carbon, SiC, TC
Seat: Ceramic, SiC, TC
Elastomer: NBR, EPDM, VIT, Aflas, FEP
Other Metal Parts : SS304, SS316

Description

LWR-3 mechanical seals 16mm for LOWARA pump replace Roten UNE5-16MM is supplied as a like-for-like replacement for Lowara pump applications. Typical duty is light-duty chemical transfer. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. Faces are silicon carbide against carbon graphite, with EPDM secondary sealing as standard. It is a balanced design, so face loading stays controlled as pressure rises.

Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. Keep the faces clean during fitting; a single grit particle will open a leak path.

Clean the chamber and the shaft before fitting; grit left in the bore will tilt the gland. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.

Pricing and availability follow the pump model and shaft size given on the enquiry. The unit belongs to the Victor’s OEM mechanical seals range line. For a different shaft size, see LWR-2 16mm pump mechanical seals for Lowara pump replace Roten 5-16mm or LWR-1 12mm pump mechanical seals for Lowara pump replace Roten 5-12mm. Include the quantity and the required elastomer option with the enquiry. Cross-reference is by pump model and part number, with the shaft and casing dimensions confirmed before the order is released.