LWR-1 12mm pump mechanical seals for Lowara pump replace Roten 5-12mm

Operation Conditions

Temperature: -20℃ to 200℃ dependent on the elastomer
Pressure: Up to 8 bar
Speed: Up to 10m/s
End Play /axial float Allowance:±1.0mm
Size: 12mm

Material

Face: Carbon, SiC, TC
Seat: Ceramic, SiC, TC
Elastomer: NBR, EPDM, VIT, Aflas, FEP
Other Metal Parts : SS304, SS316

Description

LWR-1 12mm pump mechanical seals for Lowara pump replace Roten 5-12mm is a drop-in replacement unit for Lowara pumps, matched on shaft size and working height. Typical duty is clean water and light chemical service. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. Faces are silicon carbide against carbon graphite, with EPDM secondary sealing as standard.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Keep the faces clean during fitting; a single grit particle will open a leak path.

Fitting follows the standard procedure: measure shaft diameter, chamber depth and working height, then set the seal to the recorded dimension before the pump is reassembled. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.

Pricing and availability follow the pump model and shaft size given on the enquiry. The unit belongs to the OEM pump seals line. Two close alternatives are LWR-2 16mm pump mechanical seals for Lowara pump replace Roten 5-16mm and LWR-3 mechanical seals 16mm for LOWARA pump replace Roten UNE5-16MM. Include the quantity and the required elastomer option with the enquiry.