Description

IMO pump marine shaft seals ACE ACG 194030, 189964 replaces the original seal on IMO pumps without changing the housing or the shaft. It is normally specified for process water in general industry. Bore and shaft tolerances follow the original part, so no adaptor is needed.

Sealing geometry follows the original, built around O-ring mounting that keeps the spring out of the pumped medium. Standard build pairs silicon carbide with carbon graphite faces and EPDM O-rings. The unit is unbalanced, which suits the lower pressure range it is designed for.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Keep the faces clean during fitting; a single grit particle will open a leak path.

Clean the chamber and the shaft before fitting; grit left in the bore will tilt the gland. A seal that has run dry shows heat colouring on the faces before it shows a leak.

As a rule, EPDM suits water-based duty, FKM suits oils and fuels, and FFKM is used where solvents would swell the other two. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Orders are matched on pump model, shaft size and medium. The unit belongs to the Victor’s OEM pump seals line. Two close alternatives are Marine pump mechanical seals for IMO 190340 and High quality pump shaft seal for IMO ACG/ACF series XVXX 190336. Include the quantity and the required elastomer option with the enquiry.

The reference carried by this unit is 194030. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.

IMO pump marine shaft seals ACE ACG 194030, 189964

Product Parameters

22mm marine shaft seals Imo Ace 3 Pump Shaft Seal 194030 Mechanical Seal

Operational Conditions

Size

Material

Temperature:

-40℃ to 220℃, depend on o-ring material

22mm

Face: Carbon, SiC, TC

Pressure: Up to 25 bar

Seat:  SiC, TC

Speed: Up to 25 m/s

O-rings: NBR, EPDM, VIT

End Play /axial float Allow: ±1.0mm

Metal parts: SS304, SS316

189964 marine 1
189964 marine 2
189964 marine 3

We can provide follow IMO ACE 3 generation pump spare parts.
Code: 190497,190495,194030,190487,190484,190483,189783.
IMO ACE 3 pump spare parts secondary seal 190468,190469.
pump mechanical seal parts-22mm
triple rotors screw pump
fuel oil supply system for ship in marine
ACE ACG series
high temp. mechanical seals.
Imo pump mechanical seal parts-22mm
1. IMO ACE025L3 pump to suit mechanical shaft seal 195C-22mm, Imo 190495 (wave spring)
2. IMO-190497 ACE pump mechanical seal for marine industry, Imo 190497 (coil spring)
3. IMO ACE 3 pump spare parts shaft seal 194030, Imo 194030 (coil spring)