
IMO low pressure pump ACD series shaft mechanical seal XTXX 190810
Product Parameters
Description
IMO low pressure pump ACD series shaft mechanical seal XTXX 190810 is supplied as a like-for-like replacement for IMO pump applications. Typical duty is food and beverage process lines. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The working element is a spring-loaded pusher assembly. The face pair is carbon graphite running on silicon carbide; secondary seals are NBR.
Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Keep the faces clean during fitting; a single grit particle will open a leak path.
Clean the chamber and the shaft before fitting; grit left in the bore will tilt the gland. A seal that has run dry shows heat colouring on the faces before it shows a leak.
As a rule, EPDM suits water-based duty, FKM suits oils and fuels, and FFKM is used where solvents would swell the other two. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.
Pricing and availability follow the pump model and shaft size given on the enquiry. The unit belongs to the OEM mechanical seals manufacturer line. Two close alternatives are OEM shaft mechanical seals for IMO ACD series XVXX 192691 and High quality pump shaft seal for IMO ACG/ACF series XVXX 190336. Include the quantity and the required elastomer option with the enquiry.
The reference carried by this unit is 190810. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.