IMO 190495 ACE 025-32 Mechanical Seal G050

Product Parameters

Imo Pump shaft Seal 190495, Marine Pump Mechanical Seal

Operational Conditions

Size

Material

Temperature:
-40℃ to 220℃ depend on the elastomer
         22MMFace: SS304, SS316
Pressure:
Up to Up to 25 bar
Seat: Carbon
Speed: Up to 25 m/sO-rings: NBR, EPDM, VIT,
End Play /axial float Allow: ±1.0mmMetal parts: SS304, SS316
190495 IMO 1
190495 IMO 2
190495 IMO 3

We can provide follow IMO ACE 3 generation pump spare parts.
Code: 190497,190495,194030,190487,190484,190483,189783.
IMO ACE 3 pump spare parts secondary seal 190468,190469.
pump mechanical seal parts-22mm
triple rotors screw pump
fuel oil supply system for ship in marine
ACE ACG series
high temp. mechanical seals.
Imo pump mechanical seal parts-22mm
1. IMO ACE025L3 pump to suit mechanical shaft seal 195C-22mm, Imo 190495 (wave spring)
2. IMO-190497 ACE pump mechanical seal for marine industry, Imo 190497 (coil spring)
3. IMO ACE 3 pump spare parts shaft seal 194030, Imo 194030 (coil spring)

Description

IMO 190495 ACE 025-32 Mechanical Seal G050 is supplied as a like-for-like replacement for IMO pump applications. It is normally specified for food and beverage process lines. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The design is built around O-ring mounting that keeps the spring out of the pumped medium. The face pair is carbon graphite running on silicon carbide; secondary seals are EPDM. The unit is unbalanced, which suits the lower pressure range it is designed for.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Keep the faces clean during fitting; a single grit particle will open a leak path.

Measure shaft diameter, chamber depth and working height before stripping the old unit; the new seal is set to those numbers, not to the dimensions of the worn part. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Replacement orders are confirmed against the original part number and the shaft size. The unit belongs to the OEM mechanical seals line. For a different shaft size, see 190497 22MM IMO marine pump mechanical seal or IMO low pressure pump ACD series shaft mechanical seal XTXX 190810. Include the quantity and the required elastomer option with the enquiry.

The reference carried by this unit is G050. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.