

High quality pump shaft seal for IMO ACG/ACF series XVXX 190336
Product Parameters
Description
High quality pump shaft seal for IMO ACG/ACF series XVXX 190336 is a drop-in replacement unit for IMO pumps, matched on shaft size and working height. Most units go into pulp and paper process water. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The working element is a spring-loaded pusher assembly. The face pair is carbon graphite running on silicon carbide; secondary seals are NBR. The unit is unbalanced, which suits the lower pressure range it is designed for.
Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. Running the pump dry, even briefly, will damage the faces.
Measure shaft diameter, chamber depth and working height before stripping the old unit; the new seal is set to those numbers, not to the dimensions of the worn part. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.
EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.
Quote the pump model, shaft diameter and medium when enquiring, and the seal is matched to the original part number. The unit belongs to the OEM mechanical seals line. For a different shaft size, see OEM mechanical seals for IMO pump series ACG/UCG XVXX 190335 or OEM pump shaft seal for IMO ACG/UCG 045 K5/N5/K6/N6/K7/N7 XTXX 174094. Include the quantity and the required elastomer option with the enquiry.
The reference carried by this unit is 190336. Confirm that reference against the pump nameplate and the shaft size before the order is placed, since later versions of the same pump can use a different seal arrangement.