Grundfos-9 OEM mechanical seals suitable for Grundfos pump

Combination materials

Rotary Face 

Silicon carbide (RBSIC)

Tungsten carbide

Stationary Seat

Silicon carbide (RBSIC)

Carbon graphite resin impregnated

Tungsten carbide

Auxiliary Seal

Ethylene-Propylene-Diene (EPDM)

Fluorocarbon-Rubber (Viton)

Spring

Stainless Steel (SUS304)

Stainless Steel (SUS316)

Metal Parts

Stainless Steel (SUS304) 

Stainless Steel (SUS316)

Shaft size

12mm and 16mm

Description

Grundfos-9 OEM mechanical seals suitable for Grundfos pump is a drop-in replacement unit for Grundfos pumps, matched on shaft size and working height. Typical duty is building services and HVAC plant. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. The face pair is tungsten carbide running on silicon carbide; secondary seals are FKM. The unit is unbalanced, which suits the lower pressure range it is designed for.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Keep the faces clean during fitting; a single grit particle will open a leak path.

Fitting follows the standard procedure: measure shaft diameter, chamber depth and working height, then set the seal to the recorded dimension before the pump is reassembled. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.

As a rule, EPDM suits water-based duty, FKM suits oils and fuels, and FFKM is used where solvents would swell the other two. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Quote the pump model, shaft diameter and medium when enquiring, and the seal is matched to the original part number. The unit belongs to the OEM mechanical seals manufacturer line. Related units in the same family include Grundfos-4 pump mechanical seals suitable for Grundfos Type B and Grundfos-11 OEM pump mechanical seals for Grundfos pump. Include the quantity and the required elastomer option with the enquiry.