Grundfos-8 cartridge seals for CR, CRN, and CRI Vertical Grundfos pump

Operating range

Pressure: ≤1MPa
Speed: ≤10m/s
Temperature: -30°C~ 180°C

Combination materials

Rotary Ring: Carbon/SIC/TC
Stationary Ring: SIC/TC
Elastomers: NBR/Viton/EPDM
Springs: SS304/SS316
Metal Parts: SS304/SS316

Shaft size

12MM,16MM,22MM

Description

Grundfos-8 cartridge seals for CR, CRN, and CRI Vertical Grundfos pump is a replacement mechanical seal for Grundfos pumps, built to the original mounting envelope. Most units go into marine and offshore auxiliary pumps. Bore and shaft tolerances follow the original part, so no adaptor is needed.

Sealing geometry follows the original, built around a cartridge build that is set on the bench and fitted as one unit. Standard build pairs silicon carbide with carbon graphite faces and FKM O-rings. It is a balanced design, so face loading stays controlled as pressure rises.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Running the pump dry, even briefly, will damage the faces.

Measure shaft diameter, chamber depth and working height before stripping the old unit; the new seal is set to those numbers, not to the dimensions of the worn part. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.

Quote the pump model, shaft diameter and medium when enquiring, and the seal is matched to the original part number. The unit belongs to the OEM seal replacement line. Related units in the same family include Grundfos-13 long type mechanical seals for Grundfos SA pump and Grundfos-12 60mm long type mechanical seals for Grundfos SA pump. Include the quantity and the required elastomer option with the enquiry.