Grundfos-5 mechanical seal for CNP-CDL series Grundfos pump

Application

CNP-CDL12, CDL-12/WBF14 , YFT-12 (CH-12) Mechanical Seals For Shaft Size 12mm CNP-CDL , CDLK/CDLKF-1/2/3/4 Pumps

CNP-CDL16 , CDL-16/WBF14 , YFT-16 (CH-16) Mechanical Seals For Shaft Size 16mm CNP-CDL , CDLK/F-8/12/16/20 Pumps

Operating Ranges

Temperature:-30℃ to 200℃

Pressure: ≤1.2MPa

Speed: ≤10m/s

Combination Materials

Stationary Ring: Sic/TC/Carbon

Rotary Ring: Sic/TC

Secondary Seal: NBR / EPDM / Viton

Spring and Metal Part: Stainless Steel

Shaft size

12mm, 16mm

Description

Grundfos-5 mechanical seal for CNP-CDL series Grundfos pump is a replacement mechanical seal for Grundfos pumps, built to the original mounting envelope. Typical duty is marine and offshore auxiliary pumps. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. Standard build pairs tungsten carbide with silicon carbide faces and FKM O-rings.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. A short dry run is enough to score the faces, so prime the chamber before start-up.

Measure shaft diameter, chamber depth and working height before stripping the old unit; the new seal is set to those numbers, not to the dimensions of the worn part. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Send the nameplate data with the model and shaft size, and the unit is checked against the original drawing. The unit belongs to the OEM pump seals line. Two close alternatives are GLF-14 Grundfos pump mechanical seal 22mm and Grundfos-13 long type mechanical seals for Grundfos SA pump. Include the quantity and the required elastomer option with the enquiry.