
Grundfos-4 pump mechanical seals suitable for Grundfos Type B
Application
GRUNDFOS® Pump Types
TNG® Seal Type TG706B can be used in GRUNDFOS® Pump
CHCHI,CHE,CRK SPK,TP,AP Series Pump
CR, CRN, NK,TP Series Pump
LM(D)/LP(D),NM/NP,DNM/DNP Series Pump
For more information, please do not hesitate to contact our Technology department
Operating Limits:
Temperature: -20℃ to +180℃
Pressure: ≤1.2MPa
Speed: ≤10m/s
GRUNDFOS® Pump Types
TNG® Seal Type TG706B can be used in GRUNDFOS® Pump
CH,CHI,CHE,CRK,SPK,TP,AP Series Pump
CR, CRN, NK,TP Series Pump
LM(D)/LP(D),NM/NP,DNM/DNP Series Pump
For more information, please do not hesitate to contact our Technology department
Temperature: -20℃ to +180℃
Pressure: ≤1.2MPa
Speed: ≤10m/s
Combination Materials
Rotary Face
Silicon carbide (RBSIC)
Carbon graphite resin impregnated
Tungsten carbide
Stationary Seat
Silicon carbide (RBSIC)
Carbon graphite resin impregnated
Tungsten carbide
Auxiliary Seal
Ethylene-Propylene-Diene (EPDM)
Fluorocarbon-Rubber (Viton)
Spring
Stainless Steel (SUS304)
Stainless Steel (SUS316)
Metal Parts
Stainless Steel (SUS304)
Stainless Steel (SUS316)
Shaft size
12mm, 16mm
Our Services & Strength
PROFESSIONAL
Is a manufacturer of mechanical seal with equipped testing facility and strong technical force.
TEAM & SERVICE
We are a young, active and passionate sales team We can offer our customers first- class quality and innovative products at available prices.
ODM & OEM
We can offer customized LOGO, packing, color, etc. Sample order or small order is completely welcomed.
Description
Grundfos-4 pump mechanical seals suitable for Grundfos Type B is a drop-in replacement unit for Grundfos pumps, matched on shaft size and working height. Typical duty is process water in general industry. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The working element is a spring-loaded pusher assembly. Standard build pairs silicon carbide with carbon graphite faces and NBR O-rings. It is a balanced design, so face loading stays controlled as pressure rises.
Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. Running the pump dry, even briefly, will damage the faces.
Before fitting, record shaft diameter, seal chamber bore and depth; the axial working height is set from those three measurements, not from the old seal alone. A seal that has run dry shows heat colouring on the faces before it shows a leak.
As a rule, EPDM suits water-based duty, FKM suits oils and fuels, and FFKM is used where solvents would swell the other two. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.
Replacement orders are confirmed against the original part number and the shaft size. The unit belongs to the Victor’s OEM seal replacement line. Two close alternatives are Grundfos-13 long type mechanical seals for Grundfos SA pump and Grundfos-12 60mm long type mechanical seals for Grundfos SA pump. Include the quantity and the required elastomer option with the enquiry. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.