Grundfos-3 Single spring mechanical seals to suit Grundfos pump

Application

Clean water

sewage water

oil

other moderately corrosive fluids

Operating range

this is single-spring, O-ring mounted. semi-cartridge seals with threaded Hex-head. Suit for GRUNDFOS CR, CRN and Cri-series pumps

Shaft Size: 12MM,16MM

Pressure: ≤1MPa

Speed: ≤10m/s

Material

Stationary Ring: Carbon, Silicon Carbide, TC

Rotary Ring: Silicon Carbide, TC, ceramic

Secondary Seal: NBR, EPDM, Viton

Spring and Metal Parts: SUS316

Shaft Size

12mm, 16mm

Description

Grundfos-3 Single spring mechanical seals to suit Grundfos pump is a replacement mechanical seal for Grundfos pumps, built to the original mounting envelope. Most units go into marine and offshore auxiliary pumps. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a cartridge build that is set on the bench and fitted as one unit. Faces are tungsten carbide against silicon carbide, with FKM secondary sealing as standard. It is a balanced design, so face loading stays controlled as pressure rises.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Keep the faces clean during fitting; a single grit particle will open a leak path.

Fitting follows the standard procedure: measure shaft diameter, chamber depth and working height, then set the seal to the recorded dimension before the pump is reassembled. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.

Replacement orders are confirmed against the original part number and the shaft size. The unit belongs to the OEM mechanical seals line. Two close alternatives are Grundfos pump mechanical seals shaft size 32mm and OEM Grundfos-1 Type H pump mechanical seals. Include the quantity and the required elastomer option with the enquiry.