Grundfos-12 60mm long type mechanical seals for Grundfos SA pump

Operational Conditions:

Temperature: -20ºC to +180ºC

Pressure: ≤2.5MPa

Speed: ≤15m/s

Materials:

Stationary Ring: Ceramic, Silicon Carbide, TC

Rotary Ring: Carbon, Silicon Carbide

Secondary Seal: NBR, EPDM, Viton, PTFE

Spring and Metal Parts: Steel

3. Shaft size: 60mm:

4. Applications: Clean water, sewage water, oil and other moderately corrosive fluids

Description

Grundfos-12 60mm long type mechanical seals for Grundfos SA pump is a replacement mechanical seal for Grundfos pumps, built to the original mounting envelope. Typical duty is food and beverage process lines. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. Standard build pairs silicon carbide with carbon graphite faces and FKM O-rings. The unit is unbalanced, which suits the lower pressure range it is designed for.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Running the pump dry, even briefly, will damage the faces.

Check the shaft for wear at the secondary seal track and the chamber for scoring before the new unit goes on. A seal that has run dry shows heat colouring on the faces before it shows a leak.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.

Replacement orders are confirmed against the original part number and the shaft size. The unit belongs to the OEM mechanical seals range line. For a different shaft size, see Grundfos-13 long type mechanical seals for Grundfos SA pump or Grundfos-4 pump mechanical seals suitable for Grundfos Type B. Include the quantity and the required elastomer option with the enquiry.