Grundfos-11 OEM pump mechanical seals for Grundfos pump

Operating range

Temperature: -20ºC to +180ºC
Pressure: ≤1.2MPa
Speed: ≤10m/s

Combination Materials

Rotary Face

Silicon carbide (RBSIC)

Tungsten carbide

Stationary Seat  

Silicon carbide (RBSIC)

Carbon graphite resin impregnated

Tungsten carbide

Auxiliary Seal

Ethylene-Propylene-Diene (EPDM)

Fluorocarbon-Rubber (Viton)   

Spring

Stainless Steel (SUS304)

Stainless Steel (SUS316)

Metal Parts

Stainless Steel (SUS304)

Stainless Steel (SUS316)

Shaft Size

12mm,16mm

Description

When the original Grundfos seal is discontinued or on long lead, Grundfos-11 OEM pump mechanical seals for Grundfos pump is the replacement that keeps the pump running. It is normally specified for light-duty chemical transfer. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. Faces are tungsten carbide against silicon carbide, with FKM secondary sealing as standard. The unit is unbalanced, which suits the lower pressure range it is designed for.

Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. A short dry run is enough to score the faces, so prime the chamber before start-up.

Check the shaft for wear at the secondary seal track and the chamber for scoring before the new unit goes on. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Replacement orders are confirmed against the original part number and the shaft size. The unit belongs to the OEM mechanical seals line. Two close alternatives are Grundfos-9 OEM mechanical seals suitable for Grundfos pump and OEM Grundfos-1 Type H pump mechanical seals. Include the quantity and the required elastomer option with the enquiry.