Grundfos-10 Replacement mechanical seals 22mm for Grundfos pump

Applications

Clean water
sewage water
oil and other moderately corrosive fluids
Stainless Steel (SUS316)

Operating range

Equivalent to Grundfos pump
Temperature: -20ºC to +180ºC
Pressure: ≤1.2MPa
Speed: ≤10m/s
Standard Size: G06-22MM

Combination Materials

Stationary Ring: Carbon, Silicon Carbide, TC
Rotary Ring: Silicon Carbide, TC, ceramic
Secondary Seal: NBR, EPDM, Viton
Spring and Metal Parts: SUS316

Shaft Size

22mm

Description

Grundfos-10 Replacement mechanical seals 22mm for Grundfos pump is used to replace the original seal on Grundfos pumps in service, on the same shaft and chamber dimensions. Typical duty is cooling water and service water circuits. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. Faces are tungsten carbide against silicon carbide, with FKM secondary sealing as standard.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. A short dry run is enough to score the faces, so prime the chamber before start-up.

Set the working height from the measured chamber depth rather than from the worn seal, then check face squareness before the pump goes back together. A seal that has run dry shows heat colouring on the faces before it shows a leak.

As a rule, EPDM suits water-based duty, FKM suits oils and fuels, and FFKM is used where solvents would swell the other two. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Orders are matched on pump model, shaft size and medium. The unit belongs to the Victor’s OEM mechanical seals range line. Related units in the same family include Grundfos-13 long type mechanical seals for Grundfos SA pump and Grundfos-12 60mm long type mechanical seals for Grundfos SA pump. Include the quantity and the required elastomer option with the enquiry. The part number and the pump model are the two things to match; the set is then checked against the original drawing before it ships.