GLF-14 Grundfos pump mechanical seal 22mm

Operating Range

Pressure: ≤1MPa
Speed: ≤10m/s
Temperature: -30°C~ 180°C

Combination Materials

Rotary Ring: Carbon/SIC/TC
Stationary Ring: SIC/TC
Elastomers: NBR/Viton/EPDM
Springs: SS304/SS316
Metal Parts: SS304/SS316

Shaft Size

22MM

Description

GLF-14 Grundfos pump mechanical seal 22mm replaces the original seal on Grundfos pumps without changing the housing or the shaft. It is normally specified for pulp and paper process water. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. Faces are silicon carbide against carbon graphite, with FKM secondary sealing as standard.

Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. A short dry run is enough to score the faces, so prime the chamber before start-up.

Check the shaft for wear at the secondary seal track and the chamber for scoring before the new unit goes on. A seal that has run dry shows heat colouring on the faces before it shows a leak.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.

Quote the pump model, shaft diameter and medium when enquiring, and the seal is matched to the original part number. The unit belongs to the OEM mechanical seals supplier line. For a different shaft size, see Grundfos-10 Replacement mechanical seals 22mm for Grundfos pump or Grundfos-5 mechanical seal for CNP-CDL series Grundfos pump. Include the quantity and the required elastomer option with the enquiry. The part number and the pump model are the two things to match; the set is then checked against the original drawing before it ships.