Fristam-2 Single spring mechanical seals for Fristam FP/FL/FT Pump

Features

The mechanical seal is an open type
High seat held by pins
The rotating part is driven by a welded-on disc with groove
Provided with an O-ring that acts as secondary sealing around the shaft
Directional
The compression spring is open

Applications

Fristam FKL pump seals
FL II PD Pump seals
Fristam FL 3 pump seals
FPR pump seals
FPX Pump seals
FP pump seals
FZX Pump seals
FM Pump seals
FPH/FPHP pump seals
FS Blender seals
FSI pump seals
FSH high shear seals
Powder Mixer shaft seals.

Materials

Face: Carbon, SIC, SSIC, TC.
Seat: Ceramic, SIC, SSIC, TC.
Elastomer: NBR, EPDM, Viton.
Metal Part: 304SS, 316SS.

Shaft Size

20mm,30mm,35mm

Description

Fristam-2 Single spring mechanical seals for Fristam FP/FL/FT Pump is a replacement mechanical seal for Fristam pumps, built to the original mounting envelope. It is normally specified for building services and HVAC plant. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The load path runs through O-ring mounting that keeps the spring out of the pumped medium. Faces are tungsten carbide against silicon carbide, with FKM secondary sealing as standard. The unit is unbalanced, which suits the lower pressure range it is designed for.

Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. Keep the faces clean during fitting; a single grit particle will open a leak path.

Clean the chamber and the shaft before fitting; grit left in the bore will tilt the gland. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Orders are matched on pump model, shaft size and medium. The unit belongs to the OEM mechanical seals line. Two close alternatives are Fristam-1 pump mechanical seals replace Vulcan W-2201/1 and Grundfos-3 Single spring mechanical seals to suit Grundfos pump. Include the quantity and the required elastomer option with the enquiry.