Flygt 9 replacement Griploc mechanical seal for Flygt pump and mixer

PRODUCT FEATURES

Resistant to heat, clogging and wear
Outstanding leakage prevention
Easy to mount

Shaft size:

 25mm

For pump model 2650 3102 4630 4660

Material:

Tungsten carbide/Tungsten carbide/ Viton

Kit inludes:

Upper seal, lower seal, and O ring

Description

Flygt 9 replacement Griploc mechanical seal for Flygt pump and mixer is a replacement mechanical seal for Flygt pumps, built to the original mounting envelope. Most units go into food and beverage process lines. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is O-ring mounting that keeps the spring out of the pumped medium. Standard build pairs tungsten carbide with silicon carbide faces and FKM O-rings. The unit is unbalanced, which suits the lower pressure range it is designed for.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. A short dry run is enough to score the faces, so prime the chamber before start-up.

Set the working height from the measured chamber depth rather than from the worn seal, then check face squareness before the pump goes back together. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Orders are matched on pump model, shaft size and medium. The unit belongs to the Flygt pump seal line. Two close alternatives are Flygt-2 upper and lower mechanical seal for flygt pump 2041 3085 3060 and Flygt 7 25mm mechanical seal for Flygt 3102 submersible sewage pump. Include the quantity and the required elastomer option with the enquiry.