Flygt 7 25mm mechanical seal for Flygt 3102 submersible sewage pump

Upper with Lower Multi Spring 3102 Flygt Mechanical Seal

1. Sealcon This is Flygt 3102 Seal,Shaft Size 25MM

2. Our seals can replace the original seals.

3.OEM and customzied products is welcomed.

4. Factory Price,High Quality ,Fast Delivery and Best Sevice.

Performance CapabilitiesSizesMaterials Combination
Temperature:dependent on the elastomer25mmFace: Carbon, SiC, TC
Seat: Ceramic, SiC, TC
Spring: SS316, hastelloy C, AM350
 

Description

Flygt 7 25mm mechanical seal for Flygt 3102 submersible sewage pump replaces the original seal on Flygt pumps without changing the housing or the shaft. Typical duty is building services and HVAC plant. Bore and shaft tolerances follow the original part, so no adaptor is needed.

Internally the seal uses a multi-spring carrier that spreads the spring load evenly over the sealing face. The face pair is silicon carbide running on carbon graphite; secondary seals are NBR. It is a balanced design, so face loading stays controlled as pressure rises.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. A short dry run is enough to score the faces, so prime the chamber before start-up.

Check the shaft for wear at the secondary seal track and the chamber for scoring before the new unit goes on. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.

Replacement orders are confirmed against the original part number and the shaft size. The unit belongs to the OEM mechanical seals line. Related units in the same family include Flygt 10 replacing mechanical seal for 3102 Flygt Pumps Grindex FJL-25 and Flygt 9 replacement Griploc mechanical seal for Flygt pump and mixer. Include the quantity and the required elastomer option with the enquiry.