

Flygt-6 High Quality Upper and Lower Mechanical Seals for Flygt 3085 pump
Features
This type of flygt mechanical seal is to replace Flygt pump model 3085-91,3085-120,3085-170,3085-171,3085-181,3085-280,3085-290 and 3085-890 .
Temperature: -20ºC to +180ºC
Pressure: ≤2.5MPa
Speed: ≤15m/s
Shaft size: 20mm
Materials:
Stationary Ring: Ceramic, Silicon Carbide, TC
Rotary Ring: Carbon, Silicon Carbide
Secondary Seal: NBR, EPDM, Viton, PTFE
Spring and Metal Parts: Steel
Description
Flygt-6 High Quality Upper and Lower Mechanical Seals for Flygt 3085 pump is a drop-in replacement unit for Flygt pumps, matched on shaft size and working height. It is normally specified for light-duty chemical transfer. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The working element is a spring-loaded pusher assembly. Standard build pairs silicon carbide with carbon graphite faces and FKM O-rings.
Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. Keep the faces clean during fitting; a single grit particle will open a leak path.
Before fitting, record shaft diameter, seal chamber bore and depth; the axial working height is set from those three measurements, not from the old seal alone. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.
EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.
Orders are matched on pump model, shaft size and medium. The unit belongs to the OEM seal replacement line. For a different shaft size, see Flygt-2 upper and lower mechanical seal for flygt pump 2041 3085 3060 or Flygt-1 up and lower pump mechanical seals for Flygt pump. Include the quantity and the required elastomer option with the enquiry. Cross-reference is by pump model and part number, with the shaft and casing dimensions confirmed before the order is released.