
Flygt-5 pump cartridge mechanical seals replacement of ITT
Operating Limits
Pressure: ≤1.2MPa
Speed: ≤10 m/s
Temperature: -30℃~+180℃
Combination materials
Rotary Ring (TC)
Stationary Ring (TC)
Secondary Seal (NBR/VITON/EPDM)
Spring & other Parts (SUS304/SUS316)
Other Parts (Plastic)
Shaft Size
Our Services & Strength
PROFESSIONAL
Is a manufacturer of mechanical seal with equipped testing facility and strong technical force.
TEAM & SERVICE
We are a young, active and passionate sales team We can offer our customers first- class quality and innovative products at available prices.
ODM & OEM
We can offer customized LOGO, packing, color, etc. Sample order or small order is completely welcomed.
Description
Flygt-5 pump cartridge mechanical seals replacement of ITT is used to replace the original seal on Flygt pumps in service, on the same shaft and chamber dimensions. It is normally specified for clean water and light chemical service. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The working element is a cartridge build that is set on the bench and fitted as one unit. Faces are tungsten carbide against silicon carbide, with FKM secondary sealing as standard.
Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. Running the pump dry, even briefly, will damage the faces.
Fitting follows the standard procedure: measure shaft diameter, chamber depth and working height, then set the seal to the recorded dimension before the pump is reassembled. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.
As a rule, EPDM suits water-based duty, FKM suits oils and fuels, and FFKM is used where solvents would swell the other two. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.
Send the nameplate data with the model and shaft size, and the unit is checked against the original drawing. The unit belongs to the OEM mechanical seals line. Related units in the same family include Flygt 11 mechanical seals for Flygt 3126/2084/2135/2151/2201 pump FKL-35 and Flygt 9 replacement Griploc mechanical seal for Flygt pump and mixer. Include the quantity and the required elastomer option with the enquiry.