
Flygt-4 stainless steel cartridge mechanical seal for Flygt Xylem pump
Combination Material
Rotary Ring (TC)
Stationary Ring (TC)
Secondary Seal (NBR/VITON/EPDM)
Spring & other Parts (SUS304/SUS316)
Other Parts (Plastic)
Stationary Seat (Aluminum alloy)
Shaft Size
Description
Flygt-4 stainless steel cartridge mechanical seal for Flygt Xylem pump is used to replace the original seal on Flygt pumps in service, on the same shaft and chamber dimensions. Typical duty is clean water and light chemical service. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The load path runs through a cartridge build that is set on the bench and fitted as one unit. Standard build pairs tungsten carbide with silicon carbide faces and FKM O-rings. The unit is unbalanced, which suits the lower pressure range it is designed for.
Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Running the pump dry, even briefly, will damage the faces.
Clean the chamber and the shaft before fitting; grit left in the bore will tilt the gland. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.
EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.
Orders are matched on pump model, shaft size and medium. The unit belongs to the OEM pump seals line. Related units in the same family include Flygt 7 25mm mechanical seal for Flygt 3102 submersible sewage pump and Flygt 9 replacement Griploc mechanical seal for Flygt pump and mixer. Include the quantity and the required elastomer option with the enquiry.