Flygt-3 Plug-in mechanical seals for Flygt pump

Advantage

Easy to install
Robust and compact rotary design
No pump modifications necessary
No special fitting tools required
No plastic parts
Stainless steel metal parts
Most seals preset to working length with removable setting clips
Significant cost savings possible

Combination Material

Rotary Ring (TC)
Stationary Ring (TC)
Secondary Seal (NBR/VITON/EPDM)
Spring & other Parts (SUS304/SUS316)
Other Parts (Plastic)
Stationary Seat(Aluminum alloy)

Shaft Size

Shaft SizeFor Flygt and Grindex Pumps & Mixers
20mm1520, 2610, 2620, 2630, 2640, 4610,4620
25mm2660, 4630,4640
35mm2670, 3153, 5100.21, 5100, 211, 5100.220,5100.221
45mm3171, 4650, 4660, 5100.250, 5100.251, 5100.260,5100.261
60mm3202, 4670, 4680, 5100.300, 5100.310, 5150.300,5150.310
90mm5150.35, 5150.36, 5150.350, 5150.360

Description

Flygt-3 Plug-in mechanical seals for Flygt pump covers Flygt pump duty as a direct replacement for the original part. It is normally specified for marine and offshore auxiliary pumps. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. The face pair is tungsten carbide running on silicon carbide; secondary seals are FKM. It is a balanced design, so face loading stays controlled as pressure rises.

Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. Keep the faces clean during fitting; a single grit particle will open a leak path.

Measure shaft diameter, chamber depth and working height before stripping the old unit; the new seal is set to those numbers, not to the dimensions of the worn part. A seal that has run dry shows heat colouring on the faces before it shows a leak.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Pricing and availability follow the pump model and shaft size given on the enquiry. The unit belongs to the Victor’s OEM mechanical seals range line. For a different shaft size, see Flygt 11 mechanical seals for Flygt 3126/2084/2135/2151/2201 pump FKL-35 or Flygt-6 High Quality Upper and Lower Mechanical Seals for Flygt 3085 pump. Include the quantity and the required elastomer option with the enquiry.