
Flygt-2 upper and lower mechanical seal for flygt pump 2041 3085 3060
Combination Material
Rotary Ring (Carbon/TC)
Stationary Ring (Ceramic/TC)
Secondary Seal (NBR/VITON)
Spring & Other Parts (65Mn/SUS304/SUS316)
Other Parts (Plastic)
Shaft Size
20mm, 22mm,28mm,35mm
Description
Flygt-2 upper and lower mechanical seal for flygt pump 2041 3085 3060 is the replacement option for Flygt pumps where the factory part is no longer stocked. Typical duty is pulp and paper process water. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The working element is a spring-loaded pusher assembly. The face pair is tungsten carbide running on silicon carbide; secondary seals are FKM.
Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. Running the pump dry, even briefly, will damage the faces.
Measure shaft diameter, chamber depth and working height before stripping the old unit; the new seal is set to those numbers, not to the dimensions of the worn part. A seal that has run dry shows heat colouring on the faces before it shows a leak.
EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.
Pricing and availability follow the pump model and shaft size given on the enquiry. The unit belongs to the OEM mechanical seals line. Related units in the same family include Flygt-6 High Quality Upper and Lower Mechanical Seals for Flygt 3085 pump and Flygt 9 replacement Griploc mechanical seal for Flygt pump and mixer. Include the quantity and the required elastomer option with the enquiry.