Flygt-1 up and lower pump mechanical seals for Flygt pump

Combination Material

Rotary Seal Face:SiC/TC
Stationary Seal Face:SiC/TC
Rubber Parts :NBR/EPDM/FKM
Spring and stamping parts:Stainless Steel
Other Parts:plastic/cast aluminum

Shaft Size

20mm ,22mm,28mm,35mm

Description

Flygt-1 up and lower pump mechanical seals for Flygt pump replaces the original seal on Flygt pumps without changing the housing or the shaft. Most units go into light-duty chemical transfer. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. The face pair is silicon carbide running on carbon graphite; secondary seals are FKM. It is a balanced design, so face loading stays controlled as pressure rises.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Running the pump dry, even briefly, will damage the faces.

Clean the chamber and the shaft before fitting; grit left in the bore will tilt the gland. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.

Pricing and availability follow the pump model and shaft size given on the enquiry. The unit belongs to the Victor’s OEM seal replacement line. Two close alternatives are Flygt-6 High Quality Upper and Lower Mechanical Seals for Flygt 3085 pump and Flygt-2 upper and lower mechanical seal for flygt pump 2041 3085 3060. Include the quantity and the required elastomer option with the enquiry.