


Conical ‘O’-Ring Mounted Mechanical Seals Vulcan Type 8 DIN
Features
Inserted Rotary Face
Being ‘O’-ring mounted, it is possible to select from a wider range of secondary seal materials
Robust, non-clogging, self adjusting and durable giving highly effective performance
Conical Spring Shaft Mechanical Seal
To suit European or DIN fitting dimensions
Operating Limits
Temperature: -30°C to +150°C
Pressure: Up to 12.6 bar (180 psi)
Limits are for guidance only. Product performance is dependent on materials and other operating conditions.
Combination material
Rotary face:Carbon/Sic/Tc
Stat Ring:Carbon/Ceramic/Sic/Tc
Description
Conical ‘O’-Ring Mounted Mechanical Seals Vulcan Type 8 DIN is a like-for-like replacement unit for standard pump seal chambers. It is normally specified for light-duty chemical transfer. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The unit is assembled around a conical spring that keeps the seal short in axial length. Faces are tungsten carbide against silicon carbide, with NBR secondary sealing as standard.
The rated window is -30 °C to 150 °C, up to 12.6 bar, with surface speeds to 25 m/s. Running the pump dry, even briefly, will damage the faces.
Set the working height from the measured chamber depth rather than from the worn seal, then check face squareness before the pump goes back together. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.
EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.
Quote the pump model, shaft diameter and medium when enquiring, and the seal is matched to the original part number. The unit belongs to the mechanical seal line. Related units in the same family include Vulcan Type 96 Parallel O-Ring Mounted Mechanical Seals and Elastomer rubber mechanical seals Vulcan Type 19B for water pump. Include the quantity and the required elastomer option with the enquiry. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site.