
APV World Series APV-3 double mechanical seal replaces Vulcan type 16
Combination materials
Rotary Face
Silicon carbide (RBSIC)
Carbon graphite resin impregnated
Stationary Seat
Silicon carbide (RBSIC)
Stainless Steel (SUS316)
Auxiliary Seal
Ethylene-Propylene-Diene (EPDM)
Fluorocarbon-Rubber (Viton)
Spring
Stainless Steel (SUS304)
Stainless Steel (SUS316)
Metal Parts
Stainless Steel (SUS304)
Stainless Steel (SUS316)
APV-3 data sheet of dimension(mm)
Description
APV World Series APV-3 double mechanical seal replaces Vulcan type 16 is a replacement mechanical seal for APV pumps, built to the original mounting envelope. It is normally specified for building services and HVAC plant. Bore and shaft tolerances follow the original part, so no adaptor is needed.
The working element is a spring-loaded pusher assembly. The face pair is silicon carbide running on carbon graphite; secondary seals are FKM. The unit is unbalanced, which suits the lower pressure range it is designed for.
Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. A short dry run is enough to score the faces, so prime the chamber before start-up.
Fitting follows the standard procedure: measure shaft diameter, chamber depth and working height, then set the seal to the recorded dimension before the pump is reassembled. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.
EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.
Send the nameplate data with the model and shaft size, and the unit is checked against the original drawing. The unit belongs to the Victor’s OEM mechanical seals range line. Related units in the same family include APV-1 OEM Mechanical seals for pumps, replace Vulcan type 16. PLUS and APV-2 pump seals replace Vulcan type 26 series and AES P06 series. Include the quantity and the required elastomer option with the enquiry.