APV-1 OEM Mechanical seals for pumps, replace Vulcan type 16. PLUS

Features

single end

unbalanced

a compact structure with good compatibility

stability and easy installation.

Operation Parameters

Pressure: 0.8 MPa or less
Temperature: – 20 ~ 120 ºC
Linear Speed: 20 m/s or less

Scopes of Application

widely used in APV World Plus beverage pumps for food and beverage industries.

Materials

Rotary Ring Face: Carbon/SIC
Stationary Ring Face: SIC
Elastomers: NBR/EPDM/Viton
Springs: SS304/SS316

APV data sheet of dimension(mm)

APV data sheet of dimensionmm

Description

APV-1 OEM Mechanical seals for pumps, replace Vulcan type 16. PLUS is supplied as a like-for-like replacement for APV pump applications. Most units go into clean water and light chemical service. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. Faces are silicon carbide against carbon graphite, with FKM secondary sealing as standard. The unit is unbalanced, which suits the lower pressure range it is designed for.

Temperature, pressure and speed limits depend on the face and elastomer combination, so the duty point should be checked against the datasheet before the order is released. Keep the faces clean during fitting; a single grit particle will open a leak path.

Set the working height from the measured chamber depth rather than from the worn seal, then check face squareness before the pump goes back together. A seal that has run dry shows heat colouring on the faces before it shows a leak.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Replacing the complete unit rather than single components avoids re-setting the working height, which is where most repeat failures start. A spare on site is worth holding for critical pumps, where a leaking seal takes the whole line out of service.

Quote the pump model, shaft diameter and medium when enquiring, and the seal is matched to the original part number. The unit belongs to the OEM mechanical seals selection line. Related units in the same family include APV-2 pump seals replace Vulcan type 26 series and AES P06 series and APV World Series APV-3 double mechanical seal replaces Vulcan type 16. Include the quantity and the required elastomer option with the enquiry.