Alfa Laval-4 Double mechanical seals for replace Vulcan 92D

Combination materials

Rotary Face       
Silicon carbide (RBSIC)
Carbon graphite resin impregnated
Stationary Seat  
Silicon carbide (RBSIC)
Tungsten carbide

Auxiliary Seal
Ethylene-Propylene-Diene (EPDM)
Spring
Stainless Steel (SUS304)
Stainless Steel (SUS316)
Metal Parts
Stainless Steel (SUS304)
Stainless Steel (SUS316)

Shaft Size

32mm and 42mm

About the Alfa Laval LKH series pump

Applications 
The LKH pump is a highly efficient and economical centrifugal pump, which meets the requirements of hygienic and gentle product treatment and chemical resistance. LKH is available in thirteen sizes, LKH-5.-10.-15, -20, -25.-35, -40, -45, -50.-60.-70, 85 and -90.

Standard design
The LKH pump is designed for CIP with emphasis on large internal radii and cleanable seals. The hygienic version of LKH has a stainless steel shroud for protection of the motor, and the complete unit is supported on four adjustable stainless steel legs.

Shaft seals 
The LKH pump is equipped with either an external single or a flushed shaft seal. Both have stationary seal rings made from stainless steel AISI 329 with sealing surface in silicon carbide and rotating seal rings in carbon. The secondary seal of the flushed seal is a long lasting lip seal the pump may also be equipped with a double mechanical shaft seal.

How to order

In ordering mechanical seal, you are requested to give us

complete information as specified below:

1. Purpose: For which equipments or what factory use.

2. Size: Diameter of the seal in millimeter or inches

3. Material: what kind of material, strength requirement.

4. Coating: stainless steel, ceramic, hard alloy or silicon carbide

5. Remarks: Shipping marks and any other special requirement.

We supply multiple Spring seals, Automotive Pump seals, Metal Bellows seals, Teflon Bellow seals, Replacement to major O.E.M seals like Flygt seals, Fristam pump  seals, A.P.V. pump seals, Alfa Laval pump seals, Grundfos pumps seals, Inoxpa pump seals, Lowarapump seals, Hidrostal pump seals, Godwin pump seals, K.S.B pump seals, E.M.U. pump seals, Tuchenhagen pump seals, Allweiler pump seals, Wilo Pump seals, Mono pumps seals, Ebara pump seals, Hilge Pump seals…

Description

Alfa Laval-4 Double mechanical seals for replace Vulcan 92D is supplied as a like-for-like replacement for Alfa Laval pump applications. It is normally specified for pulp and paper process water. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. The face pair is tungsten carbide running on silicon carbide; secondary seals are EPDM.

Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. Keep the faces clean during fitting; a single grit particle will open a leak path.

Clean the chamber and the shaft before fitting; grit left in the bore will tilt the gland. The first signs of wear are a slow leak at the secondary seal and a light polish on the faces.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Orders are matched on pump model, shaft size and medium. The unit belongs to the Alfa Laval pump seal line. Two close alternatives are Alfa laval-1 pump mechanical seals replace Vulcan type 92B and Alfa Laval-5 Laval pump seals replace Vulcan Type 93. Include the quantity and the required elastomer option with the enquiry. Compatibility is confirmed from the pump nameplate and the original part number, not from the seal size alone.